LENS Linear Light UGR<14

          ◪   Revolutionary LENS design to offer specific lighting output;

         ◪   Lower glare UGR<14;

         ◪   Different beam angle from 15°,30°, to 45°;

         ◪   Simply extrusion profile with screw free diecasting end cap;

         ◪   Integrated driver,RA90 optional and CCT tunable optional;

Method A: Suspending

1. Tighten the set screws to fix 4 strip corners at both ends       2.  Fix the lifting brackets and cable holders at both ends with screws

3. Fix the bases on the ceiling according to the drawing              4.String one end of the sling into the cable holder;

and install the cables into the bases.

Method B: Ceiling Installation

1. The two ceiling brackets are screwed to the ceiling, and the       2. Install the lamp into the ceiling brackets and lock the  2 brackets are installed within lamp length.                                      screws on the ceiling brackets;

Mehod C: Connected with End Caps

1. Remove the two small pieces at the top of the end caps;          2. Use the screw to fix the bar connectors to one end of the                                                                                                                     products, then instert another products to be spliced into the                                                                                                               bar connectors and lock the machine screw;

Method D: Connected without end caps

1. Remove the black cover and end cover,  and fix the bar               2. Instert another product to the bar connector and lock the connectors on the side of the product with set screws;        machine connectors , install all the black cover.

L Connector Connection

T Connector Connection

X Connector Connection

♦ Office

♦ Home

♦ Corridor

♦ Shops

♦ school