• Installation and maintenance must be performed by authorised and trained staff.
• Before wiring, make sure that the cables are de-energised. During wiring work, make sure that the cables remain de-energised (e.g. prevent switching back on).
• Observe your national safety regulations for the installation and use of this lamp.
• The manufacturer accepts no liability for injuries or damage caused by unintended use or incorrect installation.
• If the lamp is retroactively modified, the person who made the modifications then becomes the manufacturer.
• To avoid risks, the lamp must only be operated if there are no visible signs of damage to components, in particular to the connecting cable.
• Only the manufacturer is authorized to replace defective components.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.
• All dimensions stated in mm.
• The drawings are not to scale.
• Technical changes are reserved